APPRO PT cloud camera (LC-6790)
1. Screw the mounting base (A) into the camera.
2. Locate the position you want to install the mounting bracket (B).Make sure the bracket is locked properly. Place the mounting base (A) mounting bracket (B). Secure camera to the mounting bracket.
3. Proceed with initial setup such as focus tuning.
APPRO cube cloud camera (LC-6760)
1. Place the mounting base and use a pencil to mark the holes. Drill two holes or screws where you marked. Fix the mount base to the ceiling/wall with the screws.
2. Place the mounting base over the screw that is mounted on the wall. Make sure the base is locked. Place the base cover on the base and screw the camera stem clockwise into the mounting base.
3. Adjust the monitoring direction of the camera. Tighten the collar to lock camera in place.